TT-46 WIRETAP DETECTOR
$259.99
Goods and services provided by Security Cameras 911 (FL, USA).
Sold by 2CheckOut.com Inc. (Ohio, USA).
The TT-46 is The is the only test set that lets you quickly
and easily check both single and two line phone systems for
series and parallel taps. This advanced unit tests every possible
combination of wires in a four wire cable. This lets you detect
some of the more sophisticated taps that use split pairs.
While not much can be done about down-line taps, the TT-46
will help you check your phone lines for on-premises series
and parallel bugs and wiretaps. You can also check your telephone
for the most common types of hookswitch bypasses. (A hookswitch
bypass is a modification to the telephone instrument that
causes the transmitter or receiver in the telephone handset
to pick up room sounds and pass them down the phone line even
with the phone hung up. This effectively turns the telephone
into a room monitor.)
The TT-46 detects series devices with a resistance of 10
ohms or more. (Most series taps have a resistance of over
100 ohms.) It also detects parallel devices with a resistance
of 65 megohms or less. (Most parallel taps are under 30 megohms.)
It can also detect certain capacitively coupled taps.
Also included in the TT-46 is a line monitor that lets you
check the wire pairs for the presence of room audio when the
phones are hung up. (The presence of room audio on the phone
line when the telephones are not being used is a sure sign
of bugging.) A line driver is part of the monitor function.
The line driver is used to turn on (activate) any voltage
operated microphones, such as FET mics, that may be connected
to a pair of wires.
The unit weighs 9 oz. and measures 7" x 4.6" x
2.25" (with the cover closed). It is powered by one 9
volt alkaline battery (included). Also included are all necessary
cords, plugs and adapters along with an illustrated instruction
manual.
--------------------------------------------------------------------------------
Please note that the TT-46 is not a "magicbox"
that is connected permanently to a working phone line. is
test sets that let you check your on-premises wiring and telephones
for eavesdropping devices or taps. In order to do this, you
must be able to disconnect your inside wiring from the telephone
line coming into your home or business.
This is done at the interface between the telephone line
and inside wiring; usually just by unplugging a cable at the
interface box mounted on the side of the building. There is
nothing difficult about this, but, of course, you must have
access to this interface box.
Copyright © 2006-07 [SECURITY CAMERAS911] All rights reserved. wiretap detector